DISCONTINUED - Effective September, 1 2000

Replaced by the KP5 and KP5-E which is more powerful, lighter and easier to handle. See the KP5 and KP5-E page for details.

Of course we will continue to support the KP4 and KP4-E with parts and service. Also, you can upgrade your KP4 and KP4-E to the KP5 models. Contact us for complete details.

Maintenance

• CUTTER BUNDLE REPLACEMENT:

  • Remove COTTER PIN & WASHER (76MP), from both ends of SPINDLE, (643 or 643E).

  • Slide CUTTER BUNDLE (674 or 674E), and CUTTER BUNDLE FELT (645), from SPINDLE.

  • Slide new CUTTER BUNDLE FELT & CUTTER BUNDLES on SPINDLE. Lock PLATE on CUTTER BUNDLE to face in toward CUTTER BUNDLE FELT and CUTTER TIPS must point in the direction of rotation .

  • Replace COTTER PINS & WASHER.

• LUBRICATION:

  • Change grease (676) in Gear Housing after every 8 hours of operation. Remove HANDLE (608). With Tool sitting level add (676) grease through hole. Then replace HANDLE.

Copyright © 2000 Aurand Mfg. & Equip. Co., Inc.

Last modified: November 29, 2005